All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

What is Buried in Concrete is an Important Part of Demolition

What is Buried in Concrete is an Important Part of Demolition

The history of concrete goes back at least 8,000 years, and it has been used extensively in construction since the Roman Empire. Next to water, it is the second most-consumed material on earth. Consequently, millions of tons of concrete are removed from demolition sites around the world each year. Knowing what’s buried in the concrete is an important part of every demolition project.

Demolition of concrete is not a straightforward, cut-and-dried process. It is not uncommon for contractors to have embedded rebar, conduit, plumbing piping, and, occasionally, duct work in cement during construction, rather than installing them overhead. If blueprints are not available at demolition, as is often the case, demolition contractors must do some detective work to determine what is present within the walls and floors of a concrete structure. This is crucial on selective demolition projects, where damaging or severing an electrical feeder, fiber optic, or plumbing line can be dangerous and potentially catastrophic to operations.

The first step in finding piping and/or ductwork lines in concrete is to identify where they might originate, such as in mechanical rooms, shafts, and basement areas, and determine whether the line is live. If a line is to remain in-use, an MOP (method of procedure) must be developed to identify, mark, and preserve these utilities. Strick lockout/tagout practices must be followed. Paths can often be traced with a capacitive voltage sensor, or tick tester, which sends a signal through the conduit or pipe, and workers use a detector to mark the line in question. Size and depth of a line can be determined by x-raying sections of the concrete.

With over eighty years of experience in demolition, R. Baker & Son is an established expert in concrete removal. We properly identify what’s hiding within clients’ walls and floors before cutting, chopping, or coring concrete, ensuring a safe and successful outcome on every demolition project.

R. Baker & Son - All Industrial Services
1 Globe Court
Red Bank, NJ 07701
732-222-3553
http://rbaker.com/selective-demolition.php

Full News Archive

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Heavy equipment rigging for data center power infrastructure - R. Baker & Son
Turnkey Data Center & Energy Infrastructure Rigging

The digital economy and the new energy economy are being built simultaneously, and both require moving extremely heavy, extremely expensive, and extremely sensitive equipment with zero margin for...
The finishing beam used in the process weighed 2,600 lbs and had to be perfectly parallel and level to the drum it was refinishing, both within less than 1/64 of an inch.
Industrial Drum Refinishing Support: A Custom Rigging and Structural Solution

When a manufacturer we had previously performed rigging assembly and installation work for returned more than a year later with a unique and complex challenge, they knew who to call. The company...
Air skates (air casters) lifting and moving multi-ton industrial equipment using compressed air in a plant relocation project
Air Skates: How to Move Multi Ton Loads Without Touching the Floor

Air skates, also known as air casters, air skids, or air dollies, are a specialized rigging solution that R. Baker & Son has deployed for many years to move heavy machinery, fragile equipment,...
demolition innovation in protection - substation, non metallic wire mesh,
Demolition Protection: Safeguarding People, Property & Critical Systems

What Demolition Protection Truly EntailsIn the complex world of demolition, protection goes far beyond basic safeguards. As therecognized leader in demolition protection, R. Baker & Son defines...
R. Baker & Son rigging crew performing pre-construction planning and heavy equipment rigging for demolition and industrial plant relocation project
Precon Services for Demolition, Rigging & Plant Relocation

For more than 90 years, R. Baker & Son has been delivering expert precon services for demolition, rigging, and industrial plant relocation projects. Before any construction work begins, our team...
Rigger working on R. Baker & Son - All Industrial Services. Welding.
Rigging, Assembly and BIM: Bridging the Gap

Prefabricated equipment and systems have become the standard for good reason. The more you can prefabricate, the faster, more cost-effective, and higher quality a project becomes. The goal is simple:...
Several large steam-to-hot-water heat exchangers
Quick Mobilization for Pilot Plant Dismantling and Demolition

When a building consolidation commitment required our client to dismantle and demolish a 30,000 square-foot pilot plant immediately, they turned to R. Baker & Son. Having rigged much of the...
Rigging, completely assembling, and setting 12 large fiberglass cylindrical tanks, each with a 17,000-gallon capacity.
Rising to a Rigging Challenge: Tank Installation in N. Philadelphia

The Project Scope As part of a major rigging project in North Philadelphia, R. Baker & Son faced a complex installation challenge: rigging, completely assembling, and setting 12 large...