All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Tank Rigging Project

Tank Rigging Project - All Industrial Services

A large food processing plant was referred to R. Baker & Son to take on the task of rigging all new equipment into an existing 200,000 sq. ft. facility. The majority of equipment consisted of large mixing, blending and heating tanks ranging in size between 5,000 and 35,000 gallons, as well as prefabricated staircases, platforms, ladders, and agitators.

The Baker Team’s first test was managing the logistics of equipment that was purchased, fabricated, and delivered on differing timetables. We utilized our two-acre outdoor storage site as well as our 30,000 sq. ft. indoor warehouse to receive and stage many of the tanks, agitators, platforms, and accessories to allow for sequential delivery as dictated by the project schedule.

Transporting the larger tanks to the facility necessitated nighttime transport due to oversize load permit restrictions. Upon arrival at the job site, 130-ton and 80-ton cranes were used to rig many of the tanks to a vertical position and lower large agitators into the vessels. The agitator shafts, which extended to the bottom of each tank, had pre-welded hubs that only allowed one inch of room through the top flange of the tanks. Confined space permits were required to secure the many sets of agitator blades inside the vessels.

During rigging and installation, building information modeling (BIM) was used to accurately pinpoint tank feet and scaffold connection points. Extreme precision, down to one-eighth of an inch, was required as riggers and millwrights worked together to position and assemble prefabricated platforms, load cells, staircases, railing, and ladders, connecting them to tanks and anchoring them to floors and structural steel. There was no room for error. Baker crews utilized a Magni rotating telescopic handler to rig and maneuver equipment into place. The project is currently proceeding slightly ahead of schedule. 

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a  Service-Disabled Veteran-Owned Business (SDVOB)  in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

R. Baker & Son - All Industrial Services
190 Boundary Road
Marlboro, NJ 07746
732-222-3553

https://rbaker.com/rigging-contractors.php

Full News Archive

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Provides a Wide Range of Environmental Services, R. Baker & Son
R. Baker & Son Provides a Wide Range of Environmental Services

Included among R. Baker & Son’s core services are environmental remediation and decontamination. We boast a team of highly-trained environmental remediation personnel as well as an arsenal...
selective demolition in hospitals
Requirements of Selective Demolition in Healthcare Facilities

Some of the most challenging selective demolition jobs are renovation projects that take place in healthcare facilities, where demolition team members must be specially trained to work in sensitive...
 Plant Demolition and Demolition Contractor Services
R. Baker & Son Demo Team Completes Partial Plant Demolition

R. Baker & Son recently completed a demolition and decommissioning project at a northern New Jersey plant. The first of R. Baker & Son’s tasks was to demolish a 60’ x 30’...
Rigging and Anchoring Heavy Machinery and Equipment
Rigging and Anchoring Heavy Machinery and Equipment

An important work scope that is often overlooked on construction projects is the rigging and anchoring of equipment to concrete, steel platforms, curbs, decking, etc. Anchoring should not be an...
Completes Selective Demolition Project on Christmas Eve
Baker Completes Selective Demolition Project on Christmas Eve

Over the recent winter holiday season, R. Baker & Son was tasked with performing selective demolition at a medical manufacturing facility that produced orthopedic titanium parts and hardware....
Rigging Project Using Building Information Modeling
3D Rigging Using BIM

R. Baker & Son was recently engaged in a complex project in which we were tasked with rigging and setting numerous pieces of process equipment from more than thirty different vendors. Items...
Rigging Project
Stainless Steel Tank Rigging Project Saved by Plan B

Progress on a construction site can sometimes be thwarted when new equipment or materials arrive with problems. Sometimes, no matter how much planning went into a project, one or two obstacles can...
Taking On Diverse Tasks on Renovation and Construction Projects
Taking On Diverse Tasks on Renovation and Construction Projects

Large renovation projects can be multi-faceted in depth and scope, and oftentimes a variety of small, unassigned tasks emerge as work progresses. Because these unexpected elements can make or break a...