All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Tank Farm Dismantling

Tank Farm Dismantling

New York and New Jersey have a fair amount of tank farms serving pharmaceutical, food and beverage, industrial manufacturing and petrochemical industries. Dismantling a tank farm is not typically a complex undertaking, but requires an experienced dismantling contractor to properly identify safety and environmental hazards as well as asset recovery opportunities. R Baker has been involved in dozens of tank farm dismantling projects over the past several years.

One recent dismantling project in New Jersey required mechanical, electrical, and structural dismantling of several tank farms. Erected in the early 80s, the farms mainly consisted of elevated stainless steel tanks ranging from 500 to 10,000 gallons covered by a steel-framed Butler-style roof system.  Most of the piping was stainless steel, with some plastic piping, and there were several sets of pumps for product transfer between tanks and delivery trucks. Connection points to the tanks, pumps, and other accessories were either stainless steel weld or tri-clover clamp.  There was an extensive grounding system for all tanks, pumps, and piping, along with several grounding bars for static connection of drums. All of the lighting and power for pumps and outlets for portable pumps were explosion-proof due to a hazardous environment Class I, Division 1, groups C and D classification. 

Dismantlement of the tank farm entailed unbolting and cutting of all piping, pumps, tanks, and electrical systems after they were cleaned and identified as safe for lockout tag out. Salvageable pumps and fittings carefully removed for reuse at another facility. After all of the mechanical electrical and structural parts and pieces were removed, R. Baker & Son dismantled the parapet wall that surrounds the tank farms. Concrete floor trench drains and holding tank were removed from the ground. The concrete was tested for any contaminants and carefully cut and removed in square blocks. Clean backfill and stone replaced the concrete floor and trench to make the area reusable again.

R. Baker & Son - Industrial Services
1 Globe Court
Red Bank, NJ 07701
732-222-3553

http://rbaker.com/dismantling-contractors.php

Full News Archive

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Rigging & Building Information Modeling
Planning A Rigging Project w/ BIM

R. Baker & Son worked closely with a client and their design firm to get upfront budget pricing for rigging building and process equipment on a large process manufacturing facility project. The...
curtain wall demolition contractor NYC
Expert in NYC Curtain Wall Dismantling and Demolition

Ever since construction of the glass-clad United Nations Secretariat Building was completed in 1952, skyscrapers encased in sparkling glass curtain walls have come to dominate the New York City...
Interior Demolition - Wet Saw
Interior Demo: Mid-Project Changes Save Time and Money

Discovering an opportunity for substantial cost savings during a project in progress is always a welcome surprise, which was the case on a warehouse renovation in which R. Baker & Son was tasked...
Safety Plan, Demolition and Rigging Contractor
Site-Specific Safety Plan

A site-specific safety plan (SSSP) is an agreement that addresses project-specific safety concerns and challenges and how to manage them. It serves as a communication tool between involved...
Preventing, Recognizing, and Treating Heat Related Illness
R. Baker Workers Trained In Heat Related Illness

With summer only just begun, there are likely many hot days ahead. In construction, demolition, and rigging, heat-related illness is a very real threat if the proper steps are not taken to prevent...
Tank Rigging Project - All Industrial Services
Tank Rigging Project

A large food processing plant was referred to R. Baker & Son to take on the task of rigging all new equipment into an existing 200,000 sq. ft. facility. The majority of equipment consisted of...
Skid Steer Loader - Demolition Contractor
The Skid Steer Loader, Workhorse of the Demolition Industry

One of the most versatile machines on any construction or demolition project is the skid steer loader, a compact, rigid-framed, engine-powered machine with lift arms that can be fitted with a variety...
Rigging Tanks In Pharmaceutical Plant
Baker Handles Pharma Rigging Project with TLC

R. Baker & Son was challenged with a unique rigging project for a pharmaceutical client in northern New Jersey.The scope of work called for removal of numerous pieces of process equipment...