All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Aerial Rigging

Aerial Rigging

When the use of perimeter cranes is not feasible for moving heavy materials and equipment due to inaccessibility or economic concerns, helicopter rigging can be an effective alternative.

Aerial lifts require highly-trained and experienced personnel, thorough rigging and flights plans, and extremely careful preparation. It is critical to determine the load’s precise weight, size, shape, and orientation. Risk assessments must be performed to identify hazards such as power lines, structures and cranes, and loose materials and structures in the landing or staging area. Flight permissions must be obtained from the FAA and other authorities.

Different helicopters are designed for different payload sizes, and the Erickson S-64 Aircrane, with a maximum hook weight of 25,000 lbs, has the largest capacity. The S-64 has a unique design that features an aft-facing pilot station, allowing full control of the aircraft while giving the aft pilot an unobstructed view and load placement to within millimeter tolerances. An anti-rotation rigging system prevents external loads from twisting or swinging from rotor wash. In addition to heavy-lift construction, uses for the S-64 include firefighting, disaster response, and timber harvesting.

R. Baker & Son has been involved in numerous helicopter rigging projects. With in-house master riggers, professional engineers, skilled rigging tradesmen, and state-of-the-art equipment, the Baker team is equipped to handle the most challenging or complex rigging project with utmost attention to safety.

R. Baker & Son - All Industrial Services
1 Globe Court
Red Bank, NJ 07701
732-222-3553
http://www.rbaker.com

 

Full News Archive

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Interior Demolition Contractor in the North East
Quick Mobilization on Interior Demolition Project

Late last spring, construction was about to get underway on a large new warehouse in upstate New York when the construction management firm called R. Baker & Son with an urgent request. The...
interior demolition, mechanical contractor, installing prefabricated skids
Rigging Prefab in Sequence

At the completion of the interior demolition phase of a large renovation project, the mechanical contractor approached R. Baker & Son to request their assistance with rigging and installing...
Green Roof Installation - R. Baker & Son Environmental Services
Rigging Team Assists in Green Roof Installation

After a new office building construction project in western-central New Jersey where R. Baker & Son had been rigging architectural features in the expansive atrium, the construction manager asked...
Demolition Day T-Shirt, R. Baker Demolition
Everyone Loves Demolition Day!

Back in the mid-1940s, the demolition wrecking ball was a unique new demolition tool. A massive heavy steel ball swung by a very skillful operator in a large crane. By carefully moving the crane and...
Logistics are vital to plant relocation project
Successful Plant Relocation

Relocating a plant is a highly demanding task, but a large portion of the work happens in the planning.Plant relocation projects must be handled through a master plan with multiple phases and...
R. Baker & Son All Industrial Services Warehouse
Storing and Rigging Specialized Bio-Equipment for New Laboratory

A biomedical research firm in upstate New York reached out to R. Baker & Son for assistance with a special project. Two areas of a 40,000 square foot research building were to be phased out to...
Abandoned Industrial Building Demolition
Reuse & Value Engineering

R. Baker & Son has nearly 85 years of experience helping customers save money on projects. One approach is to reuse existing building equipment, materials, furnishings, and architectural...
450 ton energy-efficient centrifugal chillers
Rigging and Assembly on HVAC Upgrade Project

Last winter, R. Baker & Son took part in several HVAC energy upgrade projects on four air handling units ranging from 30,000 to 50,000 CFM at a Northern New Jersey hospital, as well as the...