All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Power Plant Decommissioning

Power Plant Decommissioning

U.S. nuclear power plants are aging.  According to the Department of Energy, the average age of the 5,800 power plants in operation is about 40 years, and many them are outdated, environmentally unfriendly, costly to operate and maintain, and unprofitable.  Though nuclear power is inexpensive to produce and emits no greenhouse gases, and nuclear facilities account for about 20% of the power generated in the U.S., there is increasing pressure to make relicensing requirements more stringent and to shut down aging nuclear reactors. Also, the EPA and state agencies are imposing tougher regulations, and many of these facilities would require expensive retrofits to come into compliance.   As a result, many operators are deciding that extending the life of near-obsolete nuclear power plants no longer makes good business sense, and are opting to decommission, dismantle and/or demolish their facilities.  


Though decommissioning can be a complex and expensive task, the cost can be comparatively small compared to retrofit, and recovered scrap and salvage can offset a good portion of these costs.  Some states have established objectives shifting toward green alternatives such as wind, solar, geothermal and biofuel, and plant operators are exploring ways to convert existing facilities to renewable sources following decommissioning.  


R. Baker & Son is a seasoned contractor offering total power plant decommissioning services, from consultation to decommissioning plan development, and we have numerous safe, successful decommissioning projects under our belts.  We provide complete demolition, selective dismantling, and rigging and removal of power plant equipment, as well as asset recovery and used equipment sales.  Power plant decommissioning is strictly regulated, particularly so in nuclear facilities, and R. Baker & Son operates in strict 100% compliance.
 

To find out more about our power plant decommissioning services, please contact R. Baker & Son at 732-222-3553.  


About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a Service-Disabled Veteran-Owned Small Business (SDVOSB) in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

Demolition, wrecking and razing, rigging, millwright, plant reconfigurations, heavy rigging, Service-Disabled Veteran-Owned Small Business / SDVOSB, salvage, dismantling, decommissioning, plant and machinery moving, building demolition, riggers, environmental services, remediation, decontamination, abatement, interior demolition, investment and asset recovery.

R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311

Facebook: https://www.facebook.com/Demolition.Rigging

Full News Archive

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

R. Baker & Son All Industrial Services Warehouse
Storing and Rigging Specialized Bio-Equipment for New Laboratory

A biomedical research firm in upstate New York reached out to R. Baker & Son for assistance with a special project. Two areas of a 40,000 square foot research building were to be phased out to...
Abandoned Industrial Building Demolition
Reuse & Value Engineering

R. Baker & Son has nearly 85 years of experience helping customers save money on projects. One approach is to reuse existing building equipment, materials, furnishings, and architectural...
450 ton energy-efficient centrifugal chillers
Rigging and Assembly on HVAC Upgrade Project

Last winter, R. Baker & Son took part in several HVAC energy upgrade projects on four air handling units ranging from 30,000 to 50,000 CFM at a Northern New Jersey hospital, as well as the...
Rigging Contractor, Crane, NY,NJ, R. Baker & Son
Fundamentals of Rigging

When it comes to crane rigging, there are a number of fundamental procedures that must be followed. R. Baker & Son is one of the nation’s top rigging contractors, with extensive knowledge...
CPR and First Aid Training Class @ R.Baker & Son
Why CPR and First Aid Training is Critical in Construction

There is no question that having employees who are trained in CPR and first aid has many benefits, first and foremost the fact that it saves lives. But CPR and first aid training can be particularly...
University Hospital NY - Renovation Project
Hospital Renovation Project

A large university hospital in New York had several buildings on campus. The central building, a 75,000 sq. ft. four-story structure with a mechanical penthouse was the first to be erected in 1944,...
Demolition Contractor: Earning & Keeping Our Reputation
Demolition Contractor: Earning and Keeping Our Great Reputation

A demolition contractor’s reputation is everything, and what can take decades to build can be lost very quickly if great care is not taken. Customers have specific overall expectations, most...
Rigging Setting the Final Pieces of Process Equipment
Rigging Setting the Final Pieces of Process Equipment

A large, ongoing pharmaceutical project was facing a dilemma. With most work progressing smoothly and on-schedule, equipment for one very important process area would not be arriving onsite until the...