All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

R. Baker Contributes to Pharmaceutical Client Winning FOYA

R. Baker and Son All Industrial Services’ Efforts Contribute to Facility of the Year Award

R. Baker & Son All Industrial Services, an expert dismantlement, demolition, rigging and re-installation contractors, contributed to a global pharmaceutical company winning the Facility of the Year Award 2008 in the category of Equipment Innovation.

The Facility of the Year Awards program, sponsored by ISPE, INERPHEX, and Pharmaceutical Processing Magazine, recognizes state-of-the-art pharmaceutical manufacturing projects that utilize new and innovative technologies to enhance the delivery of a quality project, as well as reduce the cost of producing high-quality medicines.

The expansion project began by the Fortune 500 pharmaceutical company awarding R. Baker and Son All Industrial Services (R. Baker & Son) the interior demolition and equipment salvage contractor work.  The goal of this phase of the project was to perform a total interior gut out while leaving the structural members in place.  This required an immense amount of preparation, coordination and attention to safety.  After making sure all environmental concerns were addressed properly and that utilities had been disconnected or relocated, equipment salvage was commenced.  R. Baker & Son was able to help the client offset some of the costs of the project through their expertise in process equipment sales and salvage.  Once the salvaged equipment was removed and sold, the remaining interior demolition was conducted.  This included demolition of all CMU walls, removal of elevator and stairwells, removal of sheet rock walls and drop ceiling and all remaining interior non load bearing structures.  In addition, a significant portion of the first floor slab was removed along with all equipment pads on the penthouse floor.

After interior demolition services were completed, R. Baker & Son repaired all floor openings as per specifications which included new rebar and concrete.  The client then performed the necessary pre- construction tasks in preparation to receive the new equipment for the expansion project.

R. Baker & Son was then called back in to perform the next phase of work which was the reinstallation of the new equipment.  R Baker & Son was intricately involved with the detail development of the scope of work with vendor equipment shop drawings (many in German). The scope of work was to receive, rig, set and assemble/install all of the process equipment for the project. This included the new Lyopholizer, Automated fill line, process chiller, formulation isolation equipment, process air handlers, Fluid beds MP3 and MP4. Control cabinets, HMIs, various isolation chambers and complete assembly of all shipped parts from the factory acceptance tests. The shipped parts were stored in a clean area and boxes of parts numbered in the hundreds. Laser precision was needed to set equipment due to tight tolerances.  R. Baker and Son performed any necessary shimming, pressure testing, mounting, leveling, and daily protection of the new epoxy floors which could not be damaged.

R. Baker & Son was also tasked with assisting with commissioning and startup of the newly installed equipment.  The startup process was completed with ease due to all the upfront technical planning and the expert installation performed by the R. Baker & Son re-installation crews.

Despite the complexity of rigging and re-installing this delicate and very expensive process equipment, R. Baker & Son was able to safely and efficiently complete the project without damage to any of the equipment.  The project was also on-schedule and within budget.

R. Baker & Son also participated in the project’s Star Program of OSHA’s Voluntary Protection Program (VPP). As always, safety was of highest priority, and the job was completed without incident.

For more information on the project visit http://www.facilityoftheyear.org/categorywinners2008.cfm.  For more information on R. Baker & Son’s capabilities and projects completed, visit http://www.rbaker.com

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico.  The veteran founded company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million).  Capabilities include industrial and commercial demolition, riggingmachinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Website: www.rbaker.com

For more information visit our website or contact Damon Kozul, PE, CHMM at dkozul@rbaker.com

Full News Archive

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Environmental Solutions for Dismantling, Decommissioning and Demolition
Eco-Friendly Solutions for Dismantling, Demo & Decommissioning

Demolition, dismantling, or decommissioning of industrial facilities is a complex process that requires meticulous planning and execution. These sites often contain hazardous chemicals, substances,...
Selective Demolition and Rigging at Process Plant
Selective Demolition and Rigging at Process Plant

R. Baker & Son recently performed selective demolition and equipment rigging for a process plant construction project. The selective demolition was necessary to prepare the existing facility to...
Chiller and Cooling Tower Installation at a South Jersey Hospital
Rigging Success: Chiller & Cooling Tower Installation at a South Jersey Hospital

Recently, R. Baker & Son team was faced with the task of installing a new 1200-ton chiller and double cell cooling tower at a South Jersey hospital. The project was referred to us by a trusted...
Industrial Workers Rigging 2024
Celebrating a New Year from R. Baker & Son

As a new year begins, we reflect on our deep appreciation for all our employees, associates, contractors, vendors, and customers. Our founder, Ruby Baker, started R. Baker & Son in 1935 during...
Define Demolition Scope and Budget
Maximizing Your Demolition Project - Tips to Define Scope|Budget

Often on large construction and renovation projects, the demolition portion of the Scope of Work is vague or poorly defined. It’s not uncommon to see a boxed-out area on drawings with only a...
Machine skates and heavy load movement - Rigger
Rigger's Guide to Machine Skates - Role in Heavy Load Movement

In the realm of rigging, machine skates, also known as moving skates, roller skids, or dollies, have been used in one form or another throughout history. In their various forms, these devices are...
excavator at demolition site, questions about demolition contracting
Seven Key Questions Clients Want to Know About Demolition

When it comes to demolition projects, ranging from total building teardowns to selective demolition and everything in between, clients are faced with the challenge of finding the right demolition...
Interior Demolition Project - School Converted to Residential Units
Interior Demo of Old School for Conversion to Residential Units

An architect that R. Baker & Son has collaborated with reached out to us with a special interior demolition opportunity in South Jersey. The project held sentimental value for her as it involved...