All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Outrigger Newsletter June 2014

Outrigger Newsletter June 2014

Check Out - The Outrigger Newsletter, June 2014

Few things are more frustrating for clients than the not-my-problem mentality that rears its ugly head when project problems arise. Far too often, the tendency among contractors is to ask “whose responsibility is this?” rather than the more appropriate - and productive - “how do we solve this?“ R. Baker & Son subscribes to the latter school of thought.

Anyone who‘s ever been involved in a construction project is all too aware that many contractors operate under the misguided policy of taking responsibility only for what is specifically outlined in specs and drawings. When problems occur, they will engage in finger-pointing and various other unproductive tactics that serve only to stall the project and frustrate all parties involved. This is contrary to how we operate.

The Baker Team is expert in recognizing problems and remedying them before they can occur, but not all problems are avoidable. To paraphrase a famous poet, “even the best laid plans can go awry” . We approach every problem head-on and take expedient steps to correct them, with no finger-pointing, no foot-dragging, no shoulder-shrugging, and no gouging. It‘ s how we‘ve operated for nearly 80 years.

Read all the articles here: Outrigger June 2014

Full News Archive

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Demolition Project Goes Underground
Demolition Project Goes Underground

A 175,000 square-foot OTC R&D and production building, constructed in the early 1960s, was undergoing complete interior demolition to be repurposed as a pilot facility. The demolition schedule...
Copper Recycling Offsets Dismantling Project Costs
Copper Recycling Offsets Dismantling Project Costs

A large electrical-mechanical contractor hired R. Baker & Son to perform all of the electrical equipment dismantling and mechanical equipment removal at an old vitamin production facility...
CUP Multi-Phase Selective Demolition Project: Demo by Color
CUP Multi-Phase Selective Demolition Project: Demo by Color

An aging central utility plant serving a large northern New Jersey hospital was due for complete renovation, including the replacement of almost all equipment including boilers, chillers, cooling...
Rigging Safety Guidelines - Industrial Services
Rigging Safety Guidelines

Safety is paramount at R. Baker & Son, which is why we strictly observe all rigging safety regulations, guidelines and procedures on every lift we do. Guidelines for rigging safety: Inspect...
R. Baker Salvages Fixtures for Reuse on Plant Consolidation Project
R. Baker Salvages Fixtures for Reuse on Plant Consolidation

A longtime client approached R. Baker & Son with a plant relocation project in which operations at several partially-occupied buildings were to be moved to a single 200,000 sq. ft. building...
Planning for Rigging & Demo Projects
Safety Planning for Rigging and Demolition Projects

When performing a rigging or demolition project, falling materials, fall hazards, unstable structures, and a variety of other hazards can pose serious risks to both workers and the general public, so...
Rigging Process Equipment Narrow Shaft
Rigging Process Equipment Narrow Shaft

An old R&D facility in Northern New Jersey needed to renovate an area to make way for an important new expansion. Because real estate for needed process equipment was limited, the only area...
Demolition Equipment Maintenance
Demolition Equipment Maintenance SOP

Demolition equipment is always being put to the test. Every quality demolition contractor looks to get quality name equipment at a fair price. Demolition equipment maintenance falls under two...