All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

New York City Demolition Waste

New York City Demolition Waste

New York City generates over 14 tons of waste, and construction and demolition (C&D) waste accounts for more than 60%. C&D waste is defined as uncontaminated solid waste.  C&D abatement operations are regulated by the Department of Buildings (DOB), the Department of Environmental Protection (DEP), and the Fire Department of New York (FDNY).  Depending on the nature of a demolition project, permits must be issued by one or any combination of the three agencies. 

Though New York City strictly enforces disposition of construction and demolition debris, it encourages but does not require recycling of C&D waste. R. Baker & Son is wholly committed to reuse and recycling of demolition debris to ease environmental impact, conserve natural resources, and save energy. Demolition waste materials that are currently recycled include asphalt, brick, corrugated cardboard, carpet, concrete, drywall, film plastic, fluorescent lamps, glass, land clearing debris, metal, pallets, roofing, and wood. Renovation, demolition and dismantling projects may also yield salvageable materials that can be reused, such as appliances, architectural features, circuit breakers, office furniture, windows and doors, and wood timbers.  Certain solid waste cannot be categorized as construction and demolition debris.  This can include asbestos, fluorescent lights, carpeting, etc. 

Currently, there are eighty regulated construction and demolition waste processing facilities in New York State, and 280 registered C&D waste processing facilities.  Registered facilities process wood, concrete, masonry, steel, asphalt, brick, soil, and rock that are uncontaminated. In 2010 these facilities processed 11.5 million tons of construction and demolition debris and recovered about 6.3 million tons of material. 

As part of our commitment to divert construction and demolition debris from landfills and incineration facilities, R. Baker & Son is 100% LEED compliant and ensures that clients receive all LEED rating points (up to 14 points) available in our portion of a project.  Recycling and/or salvage of C&D debris can earn 1-2 LEED points.  Diversion of 50% of demolition waste is worth 1 point, and 75% earns 2 points. Non-LEED projects may also qualify for LEED points if construction and demolition debris is appropriately recycled or salvaged. 

R. Baker & Son All Industrial Services

1 Globe Court

Red Bank, NJ 07701

Phone: 732-222-3553

Fax: 732-450-031
Follow Us On Facebook

 

Full News Archive

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Rigging Safety Guidelines - Industrial Services
Rigging Safety Guidelines

Safety is paramount at R. Baker & Son, which is why we strictly observe all rigging safety regulations, guidelines and procedures on every lift we do. Guidelines for rigging safety: Inspect...
R. Baker Salvages Fixtures for Reuse on Plant Consolidation Project
R. Baker Salvages Fixtures for Reuse on Plant Consolidation

A longtime client approached R. Baker & Son with a plant relocation project in which operations at several partially-occupied buildings were to be moved to a single 200,000 sq. ft. building...
Planning for Rigging & Demo Projects
Safety Planning for Rigging and Demolition Projects

When performing a rigging or demolition project, falling materials, fall hazards, unstable structures, and a variety of other hazards can pose serious risks to both workers and the general public, so...
Rigging Process Equipment Narrow Shaft
Rigging Process Equipment Narrow Shaft

An old R&D facility in Northern New Jersey needed to renovate an area to make way for an important new expansion. Because real estate for needed process equipment was limited, the only area...
Demolition Equipment Maintenance
Demolition Equipment Maintenance SOP

Demolition equipment is always being put to the test. Every quality demolition contractor looks to get quality name equipment at a fair price. Demolition equipment maintenance falls under two...
Module Rigging & Installation
Module Rigging & Installation

R. Baker & Son recently completed a module installation at a northern New Jersey chemical pilot plant. Working closely with the owner and the module fabricator, the Baker team developed a lift...
Challenging Duct Demolition
Challenging Duct Demolition

A rare malfunction in a large HVAC system caused exhaust ductwork to collapse due to a severe negative pressure condition, and building owners were faced with a dilemma. The 160-ft. duct had to be...
Construction Crane NYC
Counting Cranes to Forecast Construction Growth

Cranes are a familiar sight in New York City and other urban areas, and people who depend on the construction industry for our livelihoods, like those of us at R. Baker & Son, tend to be...