All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Dismantling Clean and Green

Dismantling Clean and Green

Dismantling projects pose distinctly different sets of challenges depending on the industry. On pharmaceuticals projects, biological and chemical contaminants must be eliminated before dismantling can begin.

Pharmaceutical plants contain a variety of areas and equipment that may contain hazardous substances, growths, or residues. Epoxy countertops, sinks, fume hoods, biosafety cabinets, autoclaves, etc., can be found in laboratories. Process suites, which can differ widely depending on their function, may contain process piping, tanks, isolators, lyophilizers, downflow booths, and various others. Plant owners, contractors, process managers, industrial hygienists, and environment service providers must work together to identify areas and items that require cleaning and/or decontamination.

Once familiarized with the facility and its processes, the industrial hygienist will conduct thorough testing for contaminants and prescribe the precise decontamination process that must occur. This is done not only to ensure environmental and worker safety, but also to ready fixtures and equipment for reuse or resale. Decontaminated areas are then retested by the industrial hygienist and verified ready for dismantlement. Because work scope can sometimes change as a project progresses, continued teamwork among plant owners, industrial hygienists, and project contractors is essential to ensuring that newly identified problem areas are promptly tested and remediated before dismantlement.

R. Baker & Son All Industrial Services, as a multifaceted contractor whose specialties include both dismantling and environment services, can perform both the remediation of the facility as well as the dismantlement. Our dismantlement services include: decommissioning of equipment, rigging and match marking, machinery moving and transportation, plant relocation, reinstallation and millwright services, and asset recovery, and equipment resale. Environmental services include: surface cleaning, pipeline cleaning and pigging, column and vessel cleaning, tank cleaning, line flushing and first line breaks, HVAC and duct cleaning, non-ACM insulation removal, HEPA vacuum services, and power washing and steam cleaning of pipes and equipment.  

R. Baker & Son - All Industrial Services
190 Boundary Road
Marlboro, NJ 07746
732-222-3553
http://www.rbaker.com
 

Full News Archive

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Demolition Project Goes Underground
Demolition Project Goes Underground

A 175,000 square-foot OTC R&D and production building, constructed in the early 1960s, was undergoing complete interior demolition to be repurposed as a pilot facility. The demolition schedule...
Copper Recycling Offsets Dismantling Project Costs
Copper Recycling Offsets Dismantling Project Costs

A large electrical-mechanical contractor hired R. Baker & Son to perform all of the electrical equipment dismantling and mechanical equipment removal at an old vitamin production facility...
CUP Multi-Phase Selective Demolition Project: Demo by Color
CUP Multi-Phase Selective Demolition Project: Demo by Color

An aging central utility plant serving a large northern New Jersey hospital was due for complete renovation, including the replacement of almost all equipment including boilers, chillers, cooling...
Rigging Safety Guidelines - Industrial Services
Rigging Safety Guidelines

Safety is paramount at R. Baker & Son, which is why we strictly observe all rigging safety regulations, guidelines and procedures on every lift we do. Guidelines for rigging safety: Inspect...
R. Baker Salvages Fixtures for Reuse on Plant Consolidation Project
R. Baker Salvages Fixtures for Reuse on Plant Consolidation

A longtime client approached R. Baker & Son with a plant relocation project in which operations at several partially-occupied buildings were to be moved to a single 200,000 sq. ft. building...
Planning for Rigging & Demo Projects
Safety Planning for Rigging and Demolition Projects

When performing a rigging or demolition project, falling materials, fall hazards, unstable structures, and a variety of other hazards can pose serious risks to both workers and the general public, so...
Rigging Process Equipment Narrow Shaft
Rigging Process Equipment Narrow Shaft

An old R&D facility in Northern New Jersey needed to renovate an area to make way for an important new expansion. Because real estate for needed process equipment was limited, the only area...
Demolition Equipment Maintenance
Demolition Equipment Maintenance SOP

Demolition equipment is always being put to the test. Every quality demolition contractor looks to get quality name equipment at a fair price. Demolition equipment maintenance falls under two...