All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
Latest News from R Baker & Son

Crane Load Charts

Crane Load Charts

Did you know that most cranes will never pick the maximum weight they are rated for?

Many people mistakenly assume that a crane is capable of rigging any load up to or equaling its tonnage rating. In fact, a crane’s tonnage rating is based on how much weight it can lift at the shortest radius from its center pin. As the load radius and angle increases, however, the crane’s lifting capacity decreases. When at maximum extension, a 45-ton crane might only be capable of rigging less than 6,000 lbs. 

Every crane manufactured has a load chart specifying its rigging capabilities based on weight, radius, angle, and other factors. Always refer to a load chart when determining the appropriate crane to use for a rigging job. 

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a  Service-Disabled Veteran-Owned Small Business (SDVOSB)  in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

R. Baker & Son All Industrial Services
1 Globe Court
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Facebook:  https://www.facebook.com/Demolition.Rigging

Full News Archive

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Image of Critical Lifting
What is a Critical Lift?

In the crane and rigging industry, a critical lift is a rigging activity in which a comprehensive plan is necessary to minimize risk of crane failure or catastrophic loss. As for the term...
Rigging Near Overhead Powerlines
Rigging Near Overhead Powerlines

Crane operation near overhead power lines is one of the most dangerous jobs a rigging crew can undertake. In fact, electrocution is the number one cause of crane-related fatalities, making compliance...
Compact Boom Lifts Fit Through Standard Doorways
Compact Boom Lifts Fit Through Standard Doorways

R. Baker & Son occasionally encounters a situation on an interior rigging project in which a boom lift is needed to perform the job, but access is limited by narrow entryways, gates and hallways....
Rigging of Modular Prefab Pharmaceutical Plants
Rigging of Modular Prefab Pharmaceutical Plants

Installation of prefabricated modules is becoming increasingly common in the pharmaceutical industry. R. Baker & Son has been instrumental in offloading, rigging, setting in place and connecting...
Dismantling Clean and Green
Dismantling Clean and Green

Dismantling projects pose distinctly different sets of challenges depending on the industry. On pharmaceuticals projects, biological and chemical contaminants must be eliminated before dismantling...
Hydraulics: The Force Behind Rigging & Demolition
Hydraulics: The Force Behind Rigging & Demolition

Hydraulics is the workhorse of modern rigging and demolition, providing the muscles that lift, steer and drive the cranes, excavators, breakers, and hammers used each day. But hydraulics is not a...
Surgical Industrial Dismantling
Surgical Industrial Dismantling

Critical dismantling and demolition projects, such as medical facilities, pharmaceutical plants, data centers, advanced manufacturing, etc., require enabling work for the project to move forward....
3D Rigging and Routing
3D Rigging and Routing

Every sizable project that involves the installation of large equipment in or outside a building requires a rigging and routing plan. It wasn’t long ago that rigging and routing plans were...