All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|            
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

R. Baker & Son Completes Critical Installation of Generator for Private Client

R. Baker & Son Completes Critical Installation of Generator for Private Client

R. Baker and Son All Industrial Services, an expert rigging, machinery moving and equipment relocation contractor recently completed the rigging and rough setting of a 4,000 lb backup generator for a private client in New Jersey.

R. Baker & Son All Industrial Services (R. Baker & Son) was contracted by a private client to offload, rig and set a 4,000 lb generator onto a concrete pad.  The client contracted R. Baker & Son to perform the work due to their impeccable safety record (EMR 0.79), professionalism and cost effectiveness.

Prior to the commencement of work, R. Baker & Son conducted several evaluations and the development of a critical lift plan.  An evaluation of the area where the crane and equipment would be placed was conducted to ascertain ground stability and the potential for underground utilities.  The weight of the generator was also considered to determine proper selection of necessary slings and associated rigging equipment.  Based on the weight of the generator and the calculation of height and radius from center pin of crane to desired placement of generator, R. Baker & Son determined that the appropriate sized crane needed to be a 50 ton hydraulic crane

The work began by coordinating the delivery of the generator to the site with the mobilization of the crane and rigging crew.  The project needed to be completed in one day so timing was crucial.

R. Baker & Son mobilized a three (3) man expert rigging crew along with a 50 ton hydraulic crane to the site.  In addition, ancillary rigging equipment (shackles, nylon straps, etc.) and safety equipment (fire extinguishers, safety kit, etc.) were also delivered to the site.

The flat bed truck delivering the generator and the rigging crew along with crane were expertly coordinated to the site and all arrived on time in the morning.  The generator was then carefully lifted from the flatbed and then carefully placed onto the concrete pad.  The generator was rough set.

The project was completed within the 1 day timeframe set by the client.  The project was incident and accident free.  For more information on R. Baker & Son’s capabilities and projects completed, please visit http://www.rbaker.com

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico.  The veteran founded company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million).  Capabilities include industrial and commercial demolition, riggingmachinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

Contact Information

R. Baker & Son All Industrial Services
1 Globe Court
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Website: http://www.rbaker.com
Email: marketing@rbaker.com
 

Full News Archive

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Demolition Project Goes Underground
Demolition Project Goes Underground

A 175,000 square-foot OTC R&D and production building, constructed in the early 1960s, was undergoing complete interior demolition to be repurposed as a pilot facility. The demolition schedule...
Copper Recycling Offsets Dismantling Project Costs
Copper Recycling Offsets Dismantling Project Costs

A large electrical-mechanical contractor hired R. Baker & Son to perform all of the electrical equipment dismantling and mechanical equipment removal at an old vitamin production facility...
CUP Multi-Phase Selective Demolition Project: Demo by Color
CUP Multi-Phase Selective Demolition Project: Demo by Color

An aging central utility plant serving a large northern New Jersey hospital was due for complete renovation, including the replacement of almost all equipment including boilers, chillers, cooling...
Rigging Safety Guidelines - Industrial Services
Rigging Safety Guidelines

Safety is paramount at R. Baker & Son, which is why we strictly observe all rigging safety regulations, guidelines and procedures on every lift we do. Guidelines for rigging safety: Inspect...
R. Baker Salvages Fixtures for Reuse on Plant Consolidation Project
R. Baker Salvages Fixtures for Reuse on Plant Consolidation

A longtime client approached R. Baker & Son with a plant relocation project in which operations at several partially-occupied buildings were to be moved to a single 200,000 sq. ft. building...
Planning for Rigging & Demo Projects
Safety Planning for Rigging and Demolition Projects

When performing a rigging or demolition project, falling materials, fall hazards, unstable structures, and a variety of other hazards can pose serious risks to both workers and the general public, so...
Rigging Process Equipment Narrow Shaft
Rigging Process Equipment Narrow Shaft

An old R&D facility in Northern New Jersey needed to renovate an area to make way for an important new expansion. Because real estate for needed process equipment was limited, the only area...
Demolition Equipment Maintenance
Demolition Equipment Maintenance SOP

Demolition equipment is always being put to the test. Every quality demolition contractor looks to get quality name equipment at a fair price. Demolition equipment maintenance falls under two...